Kingspan(Tm) Panels, Flashings, Guttering, Barging,Anti-Condenseation Sheeting, Tile Effect Sheeting, Galvanised Purlins

   
     Phone: 042 93 77109 / 087 227 4727
Tap To Call

FAQs   arrow

Frequently Asked Questions
FAQs about Bellew Roofing Supplies Products.

What are the available lengths for Composite Panel?

Composite Panel can be cut to any length upto a maximum of 12 metres.

 

What are the available lengths for Tile Effect?

Tile Effect is available in the following lengths: 680 mm 5440 mm 1020 mm 5780 mm 1360 mm 6120 mm 1700 mm 6460 mm 2040 mm 6800 mm 2380 mm 7140 mm 2720 mm 7480 mm 3060 mm 7820 mm 3400 mm 8160 mm 3740 mm 8500 mm 4080 mm 8840 mm 4420 mm 9180 mm 4760 mm 9520 mm 5100 mm 9860 mm

 

What are the available lengths in Box Profile?

Box Profile sheets can be cut to any length.

 

What is the minimum pitch required for Tile effect roofing?

Slate Effect:

Slate Effect Cladding is manufactured to provide a roofing sheet that has the appearance of natural slate with the advantages of a modern lightweight and strong building material. Slate Effect Cladding is easy to fit and boasts a simple joint system with a secure fixing.

Sheeting is lightweight, less sub-structure is required and supports can be up to 1 metre apart.The system is very cost effective and is available in lenghts up to 6 metres.

The sheet material is 0.7mm thick with a matt polyester finish. a full range of accessories are available including ridges, joint pices, hip and starter clips.Slate Effect Cladding is ideal for environmental sensitive locations.

Manufactured in modular lenghts, Slate Effect Cladding is extremely easy to fit.The regular slate pattern combined with the use of Joining Plates allows the most economic use of the material.

Slate Effect Cladding is produced in a matt polyester paint surface and is especially embossed and finished to represent natural slate.

This finish is ideal for use in environmental sensitive locations.However other colours are available to special order but subject to quantity and coil availability.

Slate Effect Cladding is a very lightweight material (only 6kg/m2) which does not require the sub-structure to be strengthened as the more traditional roofing materials.

The minimum pitch recommended is 7.5 degrees.

 

What are the available lengths for Composite Panel?

Composite Panel can be cut to any length upto a maximum of 12 metres.

Back to Top

What are the available lengths for Tile Effect?

Tile Effect is available in the following lengths: 680 mm 5440 mm 1020 mm 5780 mm 1360 mm 6120 mm 1700 mm 6460 mm 2040 mm 6800 mm 2380 mm 7140 mm 2720 mm 7480 mm 3060 mm 7820 mm 3400 mm 8160 mm 3740 mm 8500 mm 4080 mm 8840 mm 4420 mm 9180 mm 4760 mm 9520 mm 5100 mm 9860 mm.

 

What are the available lengths in Box Profile?

Box Profile sheets can be cut to any length.

 

What is the minimum pitch required for Tile effect roofing?

The minimum pitch recommended is 7.5 degrees.